FRL Metal is a leading manufacturer and supplier of high-quality nickel strips for battery applications. Our nickel battery strips are produced from premium pure nickel raw materials (Ni-200/Ni-201) in strict compliance with ASTM B906 and EN standards. These strips are specifically engineered for battery tab welding, lithium-ion battery pack assembly, and various electrochemical applications where superior electrical conductivity, corrosion resistance, and weldability are essential.
Our nickel strips for battery are widely used in the manufacturing of rechargeable battery packs for electric vehicles (EV), hybrid electric vehicles (HEV), power tools, cellular phones, laptops, UPS systems, solar energy storage, and consumer electronics. The excellent ductility and formability of our nickel strips allow for precise punching, cutting, and spot welding, ensuring reliable electrical connections in battery module assembly.
| Parameter | Specification |
| Material | Pure Nickel (Ni-200 / Ni-201) |
| Standard | ASTM B906 |
| Nickel Content | Ni-200: 99.6% min / Ni-201: 99.0% min |
| Thickness | 0.05mm - 1.5mm |
| Width | 2mm - 50mm (custom sizes available) |
| Temper | Hard, Half-hard, Annealed |
| Surface | Mill finish, Pickled, Passivated |
| Application | Battery tab welding, lithium-ion battery packs, EV battery modules |
![]() |
![]() |
![]() |
|
Grade |
Ni |
Cu |
Fe |
C |
S |
Mn |
Si |
O |
Other |
|
Ni-200 (UNS N02200) |
99.6 min |
0.25 max |
0.25 max |
0.15 max |
0.01 max |
0.05 max |
0.03 max |
— |
Trace |
|
Ni-201 (UNS N02201) |
99.0 min |
0.25 max |
0.50 max |
0.08 max |
0.01 max |
0.05 max |
0.03 max |
— |
Trace |
Note: Other elements such as Pb, Bi, Te, Se shall not exceed 0.05% individually or 0.15% in total for Ni-200. For Ni-201, carbon content is limited to 0.08% maximum to ensure better weldability.
• High Purity: Ni-200 grade contains minimum 99.6% nickel, ensuring excellent electrical and thermal conductivity
• Superior Weldability: Optimized surface quality for consistent spot welding, seam welding, and ultrasonic welding performance
• Excellent Corrosion Resistance: Resists oxidation and chemical attack in battery electrolyte environments
• Good Formability: Can be easily punched, cut, bent, and formed into various shapes without cracking
• Uniform Thickness: Precision cold-rolled to tight tolerances for consistent welding results
• Clean Surface: Descaled and passivated surface free from oil, oxide, and impurities
1. Specialized Battery Nickel Strip Manufacturer
With over 20 years of experience in non-ferrous metal processing, FRL Metal specializes in producing high-precision nickel strips for battery applications. Our dedicated production lines ensure consistent quality and competitive pricing tailored to the battery industry’s demanding requirements.
2. Strict Quality Control
Every batch of nickel strip undergoes rigorous testing including chemical composition analysis (Spectrometer), mechanical property testing (tensile, yield, elongation), surface inspection, and dimensional verification. We provide Mill Test Certificates (MTC) with every shipment, ensuring full traceability from raw material to finished product.
3. Custom Sizes and Processing
We offer custom cutting, punching, slitting, and shaping services to meet your exact battery pack specifications. Whether you need standard dimensions or custom-formed tabs, our flexible manufacturing can accommodate orders of any quantity with fast turnaround times.
4. Competitive Pricing and Reliable Supply
As a direct manufacturer based in Baoji, China — the heart of China’s non-ferrous metal industry — we eliminate middlemen costs and offer factory-direct pricing. Our large raw material inventory and efficient production schedule ensure on-time delivery for both sample orders and bulk purchases.
5. Global Certification and Export Experience
FRL Metal is ISO 9001:2015 certified and exports to over 30 countries worldwide. Our nickel strips meet international standards including ASTM, EN, and JIS specifications, making them suitable for global battery manufacturers and automotive suppliers.
• Lithium-ion battery pack assembly (EV, HEV, PHEV)
• Power tool battery modules
• Consumer electronics battery packs (laptops, phones, cameras)
• UPS and solar energy storage battery systems
• Nickel-cadmium (NiCd) and nickel-metal hydride (NiMH) batteries
• Spot welding tab connections in battery manufacturing
• Electrical contact strips and bus bars

Q1: What grades of nickel strip do you supply for battery applications?
A: We primarily supply Pure Nickel Ni-200 (UNS N02200, EN CW027) and Ni-201 (UNS N02201) grades. Ni-200 offers higher nickel content (99.6% min) with excellent conductivity, while Ni-201 has lower carbon content (0.08% max) for improved weldability. Both grades are widely used in lithium-ion battery tab welding and battery pack assembly.
Q2: What is the typical thickness and width range of your nickel battery strips?
A: Our standard nickel strips for battery are available in thickness from 0.05mm to 1.5mm and width from 2mm to 50mm. We can also customize dimensions according to your specific battery pack requirements. Common sizes for EV battery modules include 0.1mm, 0.15mm, 0.2mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm thickness with widths of 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, etc.
Q3: What standards do your nickel strips comply with?
A: Our nickel strips are produced per ASTM B906 (Standard Specification for Nickel Strip) and EN 12508-2 standards. We can also manufacture according to JIS H 0500 or customer-specific requirements. Each shipment is accompanied by a Mill Test Certificate (MTC) from an independent third-party laboratory.
Q4: Can you provide samples? What is the MOQ?
A: Yes, we can provide free samples for standard sizes (subject to shipping cost). For custom sizes, a sample fee may apply which can be refunded against bulk orders. Our MOQ for standard products is 50 kg, and for customized products it is negotiated based on specifications and quantity requirements.
Q5: What surface treatments are available for your nickel strips?
A: We offer several surface treatment options including: mill finish (as-rolled), pickled and passivated (for improved corrosion resistance), and electro-polished (for premium surface quality). The choice of surface treatment depends on your specific welding and assembly requirements.
Q6: What is your delivery time?
A: For stock items in standard sizes, delivery is typically 7-15 working days. For customized products or larger orders, delivery time is usually 15-30 working days depending on quantity and specifications. We maintain a large inventory of common sizes to ensure fast delivery for urgent orders.
Baoji FRL New Material Technology Development Co., Ltd is headquartered in Baoji City — known as "China's Titanium Valley." As a professional manufacturer and exporter, we specialize in the production, OEM processing, and global sales of zirconium, titanium, nickel, niobium, tantalum and their alloys.
With years of industry experience, we have earned the trust of numerous clients and strategic partners worldwide. Our products have been authorized by leading enterprises across Australia, Korea, Germany, the United States, the United Kingdom, Malaysia, Central Asia, the Middle East, Taiwan and other regions.
At FRL Metal, quality and service are not just commitments — they are our core values. We strictly adhere to international standards (ASTM, AMS, etc.) and maintain ISO 9001 certification throughout our production process. Every batch undergoes rigorous testing to ensure it meets or exceeds customer specifications.
Whether you need standard products or custom solutions, our experienced team is ready to provide professional support from inquiry to delivery. We look forward to building a successful partnership with you.










![]() |
![]() |
![]() |
![]() |
![]() |
Production Equipment
























WhatsApp&Wechat: +86 13571190943
E-mail: Jenny@bjfreelong.com
Address: No.188. Gaoxin Ave, Baoji City, Shannxi, China.

Learn about our latest products and discounts through SMS or email